日,柳工銑刨機M200E陸續發往海外,將為高速公路、國道、省道、市政道路以及機場跑道等大面積維修工程提供強有力的支持。
Recently, LiuGong M200E cold planer has been successively delivered overseas, providing strong support for large-scale maintenance projects such as highways, national highways, provincial highways, municipal roads and airport runways.
M200E采用先進的設計理念和技術,優化整機重量,保證了極高的施工效率和施工靈活性。M200E采用全液壓四驅配置,爬坡能力高達100%;配備了液壓差速鎖,確保前后馬達流量一致,輪胎間的速度差異小于5%,驅動力更強;采用大扭矩馬達和減速機,銑刨泵排量達到130L/min,馬達排量達90L/min,搭載力士樂減速機最大扭矩高達24000N·m,可高效實現銑刨作業。此外,M200E支腿可向前折疊至貼近車架位置,減小了轉彎半徑,提高了貼邊作業工況的適應性且有利于狹窄工況。
The M200E adopts advanced design concepts and technologies, optimizing the overall weight to ensure extremely high construction efficiency and flexibility. With a full hydraulic four-wheel drive configuration, the M200E boasts a climbing ability of up to 100%. Equipped with hydraulic differential locks, it ensures consistent flow between front and rear motors, with speed differentials between tires of less than 5%, resulting in stronger driving force. Utilizing high-torque motors and reducers, the milling and planing pump achieves a displacement of 130L/min, motor displacement of 90L/min, and is equipped with a Rexroth reducer with a maximum torque of up to 24000N·m, enabling efficient milling and planing operations. Additionally, the M200E's support legs can be folded forward to be close to the chassis position, reducing the turning radius, improving adaptability to edge-working conditions, and facilitating operations in narrow spaces.
柳工擁有銑刨機、攤鋪機、瀝青拌合站、壓路機等一系列產品,具有完善的道路施工設備全面解決方案,提供從售前設備選型、售中技術支持到售后一站式服務,全程為客戶提供專業、高效的服務保障。
LiuGong offers a comprehensive range of products including cold planers, pavers, asphalt mixing plants, and rollers, providing a complete solution for road construction equipment. With a complete range of services from pre-sales equipment selection, in-sales technical support, to after-sales one-stop service, LiuGong ensures professional and efficient service support throughout the entire process for its customers.
柳工M200E銑刨機
主要參數
項目
Projecct
單位
Unit
M200E
銑刨寬度
width of milling
mm
2000
銑刨深度
depth of milling
mm
0-330
最大行駛速度
Max drive speed
m/min
95
理論輸料能力
Theoretical conveying capacity
m3/h
375
END
有獎?wù)骷?/strong>
歡迎與我們分享更多您與柳工的故事。
分享內容一經采用,
即有定制好禮贈送!
相關圖片、視頻及文章(未經發表)
可發送至:
overseas.marketing@liugong.com
2002年提出“建設開放的國際化柳工”至今,柳工已擁有超過30家海外子公司&機構,4座海外制造工廠,5大全球研發基地,300多家經銷商,為170多個國家和地區提供產品和服務。在打造具備全球競爭力的世界一流企業背景下,柳工將持續積極建設全價值鏈協同發展的全球戰略合作伙伴關系,堅定推進全面解決方案、全面智能化、全面國際化的“三全”戰略。
In 2002, LiuGong put forward the globalization strategy. Since then, LiuGong has had over 30 overseas subsidiaries & offices, 4 overseas manufacturing plants and 5 R&D bases spreading across the world. More than 300 dealers provide LiuGong products and services to the customers in over 170 countries & regions. Guided by the reform of building a world-class enterprise with global competitiveness, LiuGong will continue to actively build a synergistic global strategic partnership across the entire value chain by firmly promoting the "Total Globalization, Total Solution and Total Intelligent" strategy.
關注我們
聲明:本文系轉載自互聯網,請讀者僅作參考,并自行核實相關內容。若對該稿件內容有任何疑問或質疑,請立即與鐵甲網聯系,本網將迅速給您回應并做處理,再次感謝您的閱讀與關注。
不想錯過新鮮資訊?
微信"掃一掃"